- 4” full-range compact ferrite loudspeaker
- 80 W program power
- Extended response and low distortion
- Paper cone and SantopreneTM surround
- Pressed steel basket
- Ceramic magnet
- Ideal form beam-steering application (columns), portable array and compact applications
Nominal diameter Rated impedance Minimum impedance Power capacity 1
Program power 2 Sensitivity Frequency range
100 mm 4 in
8 Ω
7,3 Ω
40 WAES
80 W
87 dB 1W / 1m @ ZN
100 - 20.000 Hz
Resonant frequency, fs
D.C. Voice coil resistance, Re Mechanical Quality Factor, Qms Electrical Quality Factor, Qes Total Quality Factor, Qts Equivalent Air Volume to Cms, Vas Mechanical Compliance, Cms
92 Hz
6,4 Ω
11,3
0,96
0,88
2,8 l
668 mm / N
Voice coil diameter |
20,3 mm |
0,8 in |
Mechanical Resistance, Rms |
0,23 kg / s |
Bl factor |
|
4,2 N/A |
Efficiency, η0 |
0,22 % |
Moving mass |
|
0,0044 kg |
Effective Surface Area, Sd |
0,0055 m2 |
Voice coil length |
|
7,7 mm |
Maximum Displacement, Xmax 4 |
3 mm |
Air gap height |
|
5 mm |
Displacement Volume, Vd Voice Coil Inductance, Le @ 1 kHz |
11 cm3 0,2 mH |
Notes: |
|
|
|
|
1 The power capaticty is determined according to AES2-1984 (r2003) standard.
2 Program power is defined as power capacity + 3 dB.
3 T-S parameters are measured after an exercise period using a preconditioning power test. The measurements are carried out with a velocity-current laser transducer and will reflect the long term parameters (once the loudspeaker has been working for a short period of time).
4 The Xmax is calculated as (Lvc - Hag)/2 + (Hag/3,5), where Lvc is the voice coil length and Hag is the air gap height.
5 Product designed by Acústica Beyma S.L.
Note: Frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber, 1W @ 1m[Hz]
Frequency response on axis Frequency response 45º off axis